Kemper THERM 140 0G Instructions De Montage Et De Service page 7

Technical data
Adjustable control range
Factory pre-setting
Temperature range for thermal disinfection
Max. permissible operating temperature
Nominal pressure
Nominal sizes
Type
Noise protection
+
Flow diagrams
30 °C - 50 °C
43 °C
≥ 70 °C
90 °C
PN 16
DN 15 | DN 20 | DN 25
Figur 140 0G - male thread with flat gasket, alternatively
Figur 142 00 - with female thread
The pressure difference Δp across the regulating valve should
always be above ≤ 400 mbar.
4
Annex
© www.kemper-olpe.de – 08.2021/ K410014000008-00 – 7 / 36
incl. or excl. screw coupling
Accessories
1 Drain Valve
Dial Thermometer or
2
Temperature Sensor Pt 1000
3