Before Use - SilverCrest SHTK 2000 C1 Instructions D'utilisation Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

proximity of water presents a
danger even if the hairdryer is
switched off.
Never immerse the haird-
ryer in water. Do not
take hold of the appliance if it
has fallen into water and is still
connected to the mains socket.
Pull out the mains plug from the
socket immediately. As an addi-
tional level of protection, it is rec-
ommended that you install an
RCD (Residual Current Device).
The dimensioned trip current
must not amount to more than
30 mA in the circuit of the bath-
room. Ask your installer or a lo-
cal electrician for further advice.
Only connect the hairdryer to a
socket which has the voltage as
given on the type plate.
Do not insert any objects into the
inside of the casing.
Never open the hairdryer and
do not attempt to repair the hair-
dryer yourself. Any modifications
will void the warranty.
Only remove the mains cable with
the mains socket at the mains plug.
If the hairdryer has been dropped,
or shows other signs of damage
from being dropped, it must not
be used under any circumstances.
Safety instructions / Before use
Unwind the mains cable
it becomes tangled.
Do not use accessories or items
offered as accessories that have
not been recommended by the
manufacturer.
Repairs may only be carried out
by qualified specialist personnel
or in a workshop approved by
the manufacturer. Improper re-
pairs may place the user in con-
siderable danger.
If the mains lead
ance is damaged, in order to
avoid causing further hazards it
must be replaced by the manu-
facturer, their customer services
centre or a suitably qualified
person.

Before use

Stand on a dry, non-conductive floor.
Ensure your hands are dry.
Dry your hair beforehand with a hand towel.
Note: Depending on the switch setting and duration
of use, the styling nozzle
the hairdryer can become very hot.
There is the risk of fire and burns!
Do not touch the styling nozzle
Note: Ensure that no flammable liquids are located
in the proximity of the hairdryer.
Note: Ensure that no hair can be directly drawn in.
, when
6
of the appli-
6
, the diffuser
and
1
11
.
1
GB/IE
9

Publicité

Table des Matières
loading

Table des Matières