Télécharger Imprimer la page

HQ Power VDPL1801MHW10 Notice D'emploi page 5

Projecteur lyre compacte à led – effet wash

Publicité

Les langues disponibles
  • FR

Les langues disponibles

6. Operation
a. Stand-alone Mode
• The LED fixture can be used as a stand-alone unit. The stand-alone functions AUTO 1, AUTO 2, SOUND 1,
SOUND 2 and CUSTOM 1 can be activated without connecting any controller to the unit.
• Simply go to the RUN menu from the display and select the target program to activate.
b. Master/Slave Mode
• When two or more units are connected in series using DMX512 cables, the units can work in master/slave mode.
• Set the first unit in the series to one of the
stand-alone modes as described above, and all
other units have in SLAVE mode (from the RUN
menu).
c. DMX Mode
Channel
1
2
3
4
5
6
7
RGB macros - speed
8
9
10
d. DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDPL1801MHW10. Multiple VDP1801MHW10s can be linked through serial linking. The linking
cable should be a two-core screened cable with XLR input and output connectors.
VDPL1801MHW10
Description
Pan
Tilt
Pan / tilt speed
Red
Green
Blue
Dimmer
Strobe function
Control mode
From
To Function
0
255 From 0 to 540°
0
255 From 0 to 270°
0
255 From slow to fast
0
255 From 0 to 100%
0
255 From 0 to 100%
0
255 From 0 to 100%
0
5
No function
6
35 Red 100% / green UP / blue 0%
36
65 Red DOWN / green 100% / blue 0%
66
95 Red 0% / green 100% / blue UP
96
125 Red 0% / green DOWN / blue 100%
126
155 Red DOWN / green 0% / blue 100%
156
185 Red 100% / green 0% / blue DOWN
186
215 Red 100% / green UP / blue UP
216
240 Red UP / green down / blue 100%
241
250 Auto-macro
250
255 White
0
255 From 0 to 100%
0
255 From 0 to 24 Hz
0
45 Normal operation
46
55 RESET (after 3 sec)
56
95 Auto 1 (after 3 sec)
96
135 Auto 2 (after 3 sec)
136
175 Sound 1 (after 3 sec)
176
215 Sound 2 (after 3 sec)
216
255 Custom (after 3 sec)
5
HQPOWER

Publicité

loading