Velleman CAMSCC16 Notice D'emploi page 8

•
The lens type can be set to DC/VIDEO or MANUAL. When set to
DC/VIDEO, the switch [A]must be set in the correct position depending
on the mounted lens.
•
Brightness range: 0~36.
•
Set Automatic Gain Control (AGS) mode to AUTO or MANUAL.
•
AGC MAX is only available when AGC MODE is set to AUTO. Range
0~255. When AGC MAX <165 the AE option in the DAY/NIGHT menu (see
below) becomes unavailable (NA).
•
AGC ADJ is only available when AGC MODE is set to AUTO. Set fixed gain
value between 0~255.
•
Set FLICKERLESS to ON to eliminate the effect of fluorescent lighting on
image quality. When set to "ON", AGC mode automatically switches to
MANUAL.
Note: this option is not available (NA) when WDR mode is ON.
•
SHUTTER SPD mode is fixed (NTSC: 1/100 and PAL: 1/120) when
FLICKERLESS mode is set to "ON".
The SHUTTER SPD mode can be set to AUTO, NORMAL (NTSC: 1/60 and PAL:
1/50), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/20000, and 1/50000.
Note: when SHUTTER SPEED is set to 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000, 1/20000 or 1/50000 AGC mode automatically
switches to MANUAL.
Note: this option is not available (NA) when WDR mode is ON.
•
DSS MAX: Low speed shutter control, offers optimal brightness level (the
higher the value, the higher the brightness level).
•
DEFAULT: return to the factory-default configuration.
RETURN: Return to previous page.
WDR menu
WDR MODE
WDR LEVEL
BLC MODE
BLC LEVEL
BLC AREA
DEFAULT
RETURN
•
When Wide Dynamic Range (WDR) is set to ON, digital zoom will
automatically switch to x1 and BLC MODE, BLC LEVEL AND BLC AREA
switch to not available (NA).
•
WDR LEVEL (0~255): the higher the value, the higher the brightness
level.
•
Backlight Compensation (BLC) MODE can be set to "ON/ OFF" (when WDR
mode is OFF).
28/05/2009
CAMSCC16
WDR
ON
96
NA
NA
NA
ON
8
©Velleman nv