Velleman CAMSCC16 Notice D'emploi page 4

4. Features
• high sensitivity, low smear, high anti-blooming and high S/N ratio
• removable IR-Cut filter provides change from colour to B/W mode
automatically or manually for day and night surveillance
• RS-485/422 remote control via PELCO D&P protocol
• with built-in auto electronic shutter
• special functions via on-screen display (OSD) set-up menu
privacy masking
o
positive / negative image
o
video mirror function
o
digital zoom
o
• no lens included
5. Overview and use
Refer to the illustrations on page 2 of this manual.
A Iris Video/DC drive selector. Set to video drive when using a video driven
auto iris lens (based on brightness of the image in the video signal), or to
DC drive in case a direct driven auto iris lens is used (via a control signal
from the camera).
B Auto iris lens connector. Supplies power and control signals to the auto
iris lens. Refer to page 2 for the pin lay-out.
Note: a DC drive lens uses two coils, a driving coil (DRIVE) that
opens/closes the iris and a damping coil (DAMP) that stabilizes the
movement of the iris.
C Control buttons:
D Serial connector: to connect an external keyboard.
E Signal Ground (FG): in case of a distorted signal, connecting this
terminal to earth might enhance the signal.
F Power supply: connect a 12VDC or 24VAC power supply to these
terminals (no polarity).
G Power LED: on when power is present on the terminals [F].
H Video output connector (BNC): connect the camera to a monitor (not incl.).
28/05/2009
CAMSCC16
(T)/ Zoom Tele or Up ( )
(W)/ Zoom Wide or Down ( )
(+)/► Increase Value (＋)
(-)/◄ Decrease Value (－)
Menu Enter or Exit Setup Menu
4
©Velleman nv