Velleman CAMSCC16 Notice D'emploi page 10

•
NIGHT→DAY: switch to colour mode when AE value ≥ "NIGHT→DAY"
value (in AE mode).
•
SENSOR LEVEL: increase the value to delay the switchover to B/W mode.
Decrease the value to switch to B/W mode faster (only available when
D/N mode is set to SENSOR).
•
FILTER DELAY: set a delay time (0~15s) for switching from colour to B/W
mode in environments where rapid light condition changes occur (only
available when D/N mode is set to SENSOR.
•
AE VALUE: when in D/N AE mode, the current AE value is shown.
•
SENSOR VALUE: when in D/N SENSOR mode, the current SENSOR value
is shown.
•
The table shown below shows reference values. , please setup according
to the current scene.
Lens Type
DC Drive
Video Drive
Manual Iris
Manual Iris
WHITE BALANCE menu
WB MODE
RED GAIN
BLUE GAIN
PUSH AUTO
DEFAULT
RETURN
•
Select WB mode: AUTO, INDOOR, OUTDOOR, MANUAL, or PUSH AUTO.
•
RED GAIN/ BLUE GAIN are only available when WB MODE is set to
MANUAL.
•
When WB MODE is set to PUSH AUTO:
o PUSH AUTO ON: enable auto tracing white balance.
o PUSH AUTO OFF: Disable auto tracing white balance.
28/05/2009
CAMSCC16
Shutter
Speed
NA/ Normal
NA
Auto
Normal
WHITE BALANCE
WDR DAY→NIGHT NIGHT→DAY
On / Off
On
Off
AUTO
NA
NA
NA
ON
10
83 212
83 195
83 212
83 212
©Velleman nv