Rothenberger Industrial WPS 190 Notice D'utilisation page 34

1500000062_Anleitung_D,GB,F,I 22.12.2011 15:34 Uhr Seite 34
U-form blades for pipe-shaped cut-outs Art. Nos. 1500000069 - 71
The U-form blades for pipe-shaped cut-outs are available in 20, 27 & 34 mm sizes and are
ideal making cut-outs for pipes of this diameter.
Fitting the adapter to the foam cutter
To fit the adapter, loosen the four fixing screws
(6), slide the adapter on to the tool holder (4)
4
and subsequently re-tighten the fixing screws
(6) with the hex key (11).
6
To fit the required cutting blade, loosen the
fixing screws at the end of the adapter and
subsequently insert the cutting blade. Set the
required cutting dimension and re-tighten the
blade fixing screws.
34