Special Applications - Rothenberger Industrial WPS 190 Notice D'utilisation

1500000062_Anleitung_D,GB,F,I 22.12.2011 15:34 Uhr Seite 32

SPECIAL APPLICATIONS

Cutting table Art. No. 1500000067
The cutting table can be used together with a U-blade to produce U-shaped cuttings of various
width. The width and depth of the can be steplessly adjusted up until the maximum cutting
dimensions.
Fitting the cutting table to the foam cutter
To fit the cutting table, loosen the four
fixing screws (6), slide the adapter on to
the tool holder (4) and subsequently re-
tighten the fixing screws (6) with the hex
key (11).
32