Wsb Zpiezo Wheel Handwheel - Zeiss WSB ZPiezo CAN Manuel D'utilisation

Carl ZEISS
3.3

WSB ZPiezo Wheel handwheel

The WSB ZPiezo Wheel handwheel input device (432339-9020-000) permits operation of a
positioning system without requiring inclusion of a computer in the system.
In normal operation the LCD display shows the current position of the stage attatchment.
The three buttons enable execution of various functions.
Button 1: Pressing button 1 (Fig. 4/1) moves the stage attatchment to its central position (start
position).
Button 2: Pressing button 2 (Fig. 4/2) deactivates the input device. No further positioning can be
performed.
In the "off" condition the word "Info" appears above button 1. Pressing button 1 (Fig.
4/1) with the input device in this condition prompts the display to list system-relevant
information.
Button 3: After the controller has been switched on, the WSB Wheel is set to fast mode (high
travel speed). Pressing button 3 (Fig. 4/3) switches the system to medium mode
(medium travel speed), pressing button 3 again switches the system to slow mode
(slow travel speed).
Fig. 4 Control and functional elements
Button 1 ("Centre")
1
Button 2 ("on / off")
2
Button 3 ("fast / medium / slow")
3
4 LCD display
5 Rotary knob for manual Z positioning
12
OPERATING CONCEPT
WSB ZPiezo Wheel handwheel
432339-9010-000
WSB ZPiezo CAN
07/2015