Device Description; General; Control And Functional Elements - Zeiss WSB ZPiezo CAN Manuel D'utilisation

Carl ZEISS
2

DEVICE DESCRIPTION

2.1

General

The WSB ZPiezo CAN is a controller may be used for no purpose other than operating the WSB
500 stage attatchment (432339-9000-000) and may be used only with the specified stage inserts.
The stage attatchment and the WSB ZPiezo Wheel input device handwheel (432339-9020-000)
can be connected to the controller using the associated cables. The controller permits quick and
precise focussing in the Z direction on the sample being investigated on the stage attatchment.
In addition the controller can be connected to other system components via the RS232, USB or
CAN port.
Input to the WSB ZPiezo CAN application-related controller can be performed by the
WSB ZPiezo Wheel handwheel and the "ZEN 2" computer software. The user instructions for the
software should be complied with.
2.2

Control and functional elements

The device is equipped with the following control and functional elements:
Fig. 2 Control and functional elements
1 ON/Off switch for the controller
Indicator LED "POS" (blue)
2
Indicator LED "Ready" (yellow)
3
Indicator LED "Channel" (green)
4
5 WSB ZPiezo Wheel handwheel (see 3.3.)
8
DEVICE DESCRIPTION
General
432339-9010-000
WSB ZPiezo CAN
07/2015