Publicité
Les langues disponibles
Les langues disponibles
6.
Draw end of cable set marked with L along cable set inside the vehicle to the left rear parking light.
a)
Remove 8-input connection from left rear parking light and connect it to an appropriate cable set connection.
b)
Attach remaining cable set connection to the left rear parking light.
7.
Draw remaining end of cable set with connections along cable set inside the vehicle to the right rear parking light.
a)
Remove 8-input connection from the right rear parking light and connect it to an appropriate cable set
connection.
b)
Attach remaining cable set connection to the right rear parking light.
c)
Connect white/brown and brown connections to the earth inside the vehicle, near the right rear parking
light (use metal-sheet screw, if necessary).
8.
Connect supplied module to 15-input connection of cable set and fasten it in an appropriate place using M6x10
screw. Avoid moisture in the module (possibility of short circuit).
a)
Draw red cable to vehicle battery or to fuse box. Attach red connecting cable with positive end to the
battery or clip no. 30 in the fuse box and connect both ends with fuse box. Please, remember you are
working in a 12 V DC voltage environment.
9.
Trailer power supply:
3-input housing (red/blue, yellow, white/brown leads) is provided for expanded socket functions. Put this part of
lead bunch behind the trim. To expand socket functions it is necessary to order the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Trailer indicator defect is signalled by a control light of the vehicle by increased flashing frequency!!
Assembly instruction for customers use.
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
Remarks regarding trailer indicator operation:
part no. 990 799
part no. 990 699
Publicité
