bosal 010-228 Instructions De Montage page 4

6. Draw end of connection bunch with 8-input connection at the rear of left side cover to loudspeaker hole and con-
nect it with connection that is located there.
There is a vehicle bunch located near jack holder (in cut, crimped pipe) with red/yellow feeder lead of for lights and
7.
green/black feeder lead of reversing lights:
a) Cut red/yellow lead in an easily accessible place, put a jacket shrinking under high temperature on each end in
such a way, that the end is located in the middle of the jacket's length and then heat the jacket on the lead using
either a singeing machine or a lighter,
b) clip quick joints at the end of lead running to fog lights. Connect quick joint to
c) clip quick joints on black/green feeder lead of reversing lights and connect it to blue/red lead from connection
bunch,
d) connect brown (7-polar), brown and white/brown (13-polar) leads to earth (e.g. drill a 3mm diameter hole, and
connect and fix the eyelet terminal with sheet metal screw; do not secure the hole with anti-corrosion agent).
8. Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow,
functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the follo-
wing parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
brown leads) is provided for expanded socket
part no. 014-169
part no. 015-069
lead from connection bunch,