Sentiotec wave.com4 sound&light Instructions De Montage Et Mode D'emploi page 28

Instructions for use for the user
3. OPERATING INSTRUCTIONS FOR THE END USER
3.1. GENERAL SAFETY NOTICES
● Please be aware that the components in the housing of the coloured lamp
are operated with dangerous mains voltage.
● Do not connect or disconnect any live components! Always isolate the mains
connection beforehand using the appropriate circuit breaker in the building's
distribution system.
● Electrical switch-off must be completed in all poles in line with the relevant
regulations of the local Electricity Boards.
● Electrical work should only be carried out by a qualified expert. Any interven-
tions by unauthorised persons shall render the warranty null and void. There
is also a risk of serious electric shocks of live parts are touched.
● Keep the controls away from heat sources.
● Before start-up, check that all connections are properly connected and that
no cables or parts are damaged.
3.2. OPERATION
1. FUNCTION DESCRIPTION
The following description gives an overview of the programme functions and
operating elements of the coloured lamp wave.com4 sound & light.
2. OPERATING ELEMENTS
SWITCH ONE-/OFF
By pressing the key
on or off.
The colour control changes into the last activated mode (automatic or manual)
and the normal internal lighting goes out (only in the sauna – operating element
slave – mode).
MODE-KEY
By pressing the key
can be selected.
WORLD OF WELLNESS
, the coloured lamp and the sound function are switched
4
the individual operating modes of the coloured lamp
7
p. 8/20