bosal 003-798 Instructions De Montage page 4

Draw end of bunch marked with R to right standing lights:
6.
a) Disconnect 5-input joint of vehicle from standing lights and connect it to suitable joint of connection bunch. Con-
nect remaining joint of connection bunch to standing lights.
Draw end of bunch marked with L to left standing lights:
7.
a) Disconnect 5-input joint of vehicle from standing lights and connect it to suitable joint of connection bunch. Con-
nect remaining joint of connection bunch to standing lights,
b) Connect
connect and fix the eyelet terminal with sheet metal screw; do not secure the hole with anti-corrosion agent),
c) Draw end of bunch with fog lights function to left shock absorber clamping and back seat rest. Disconnect 5-in-
put joint running to boot lid and connect it to suitable joints of connection bunch.
Trailer power supply:
8.
Only for 13-polar version. 3-input housing (red/blue, yellow and white/brown leads) is provided for expanded
socket functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the
following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
able in 7-polar set, white and brown in 13-polar set to earth (e.g. drill a 3 mm hole,
part no. 014-169
part no. 015-069