GENERAL OPERATION
LED light colour
Flashing green
Breathing green
Permanent green
Flashing blue
Permanent blue
Off
Quick Start:
•
Turn on the main power switch on the side of the robot.
•
Press the
button to awaken the robot if the robot is in sleep
mode.
•
Press the
button a second time to start cleaning.
•
To pause the robot, press the
button again to resume the cleaning cycle.
•
Press the "back to charging station" button (
robot back to the charging station.
The battery is low, the robot is returning to
charging station.
The battery is charging.
The battery is fully charged.
The robot is on standby.
The vacuum is operating.
The robot is off or in sleep mode. To conserve
power, the light automatically turns off when
the robot is not docked to the charging
station and has been inactive for 10 minutes.
button and press the same
) to send the
13
Status
VG RVC 3002