Venga VG RVC 3002 Mode D'emploi page 11

• Connect the round plug to the adapter. To change the plug, press the switch and
turn the plug counterclockwise.
• Connect the small end of the power adapter to the connector on the back of the
charging station and plug the other end into an electrical outlet. Always leave the
charging station connected, otherwise the robot will not automatically return to it.
B. Install side brushes
Install the side brushes on the underside of the
robot by pushing a brush into each slot
provided.
Make sure you place them in accordance
with the appropriate letter ("L" or "R").
C. Main power switch
The main power switch of your Venga! robot
vacuum cleaner is on the side.
11 VG RVC 3002