Télécharger Imprimer la page

Aqua Medic Percula 100 AR Mode D'emploi page 27

Publicité

Les langues disponibles

Les langues disponibles

6.1.3. Unpacking
On unpacking, please check the lighting system immediately for any damages. In case of any
complaints, please contact your dealer directly.
6.1.4. Lamps
We do recommend to use Aqua Medic's T5 fluorescent lamp Ocean White and Ocean Blue for salt
water aquaria.
Type
sun cover 100 cm,
2 x 39 watts
6.1.5. Lamp's assembly / change of lamps
When changing the fluorescent lamp, first of all the socket rings have to be released and pushed
over the bulb. Now, the bulb can be taken out.
When assembling the new fluorescent lamp, first of all the socket rings have to be pushed on the
bulb. Then the lamp can be inserted.
Please make sure that the socket rings are mounted tightly on the bulb when mounting the lamp.
The lamps are only waterproof when the rings are mounted correctly. Also pay attention that the
sealing at the socket ring is mounted correctly.
Only turn on the light when the fluorescent lamp is mounted and the socket rings are fastened
tightly. Replace broken socket rings by new original ones by Aqua Medic.
6.1.6. Maintenance and Care
The service life of the T5 bulbs will be about 6,000 to 8,000 hours. This corresponds to about 1,5
years with a daily illumination time of 10 hours. It is recommended to exchange the bulbs before
expiration of this time interval since efficiency and colour composition change.
Clean the sun cover from time to time using a moistened cloth. Never use any additional cleaning
agents!
Activated carbon and phosphate remover (antiphos Fe) in filter bags can be inserted in the filter
baskets (Fig. 2, No. 14) underneath the trickle filter plate (Fig. 2, No. 3). Activated carbon and
phosphate remover have to be exchanged regularly.
The sponge (Fig. 2, No. 2) has to be washed, if necessary. The overflow comb (Fig. 2, No. 10) has
to be cleaned of algae and dirt remainders, too.
7. Cover with fans
The fans are connected to the transformer provided via an Y connecting cable. The fans are
adjustable and should remain constantly in operation at low power. Otherwise, water will condense
at the reflectors during the dark phase. If the outside temperatures are high, the fans can be
operated with higher speed.
7.1. Features
splash-proof fans
-
silent long-life fans with ball bearing and brush-free motor
-
12 V low voltage with adjustable transformer (3 – 12 V). By this, the cooling power can be
-
adjusted to the water temperature
high capacity fans, adjustable fom 80,000 l/h (double unit at 12 V) to 240,000 l/h (6-fold unit)
-
power consumption only 0.5 - 3 W per fan
-
diametre's fan 60 mm
-
air volume per fan 40,000 l/h with 12 V
-
Fluorescent lamps
Ocean White 39 watts
Ocean Blue 39 watts
Planta 39 watts
Fluorescent lamps length
85 cm, standard size
27

Publicité

loading