Installation
2.2 Mounting the Flowmeter
Pipe Mounting
For installation on pipe use Pipe Mount Kit CQO:1012XMB-1 (optional - see catalog) See figure
below.
①
②
③
Figure 2-1
14
Clamp
Mounting Bracket (Hardware not supplied for
wall mounting.)
Pipe
Pipe Mounting 1010 and Mounting Bracket Locations
④
U-Bolt Assembly for standard 2-inch (2.38in/
6.0452cm) pipe. (Hardware supplied.)
⑤
Transducer Cable Entry Ports
⑥
Position Plastic Strip Under Clamp
FUS1010 IP65 NEMA 4X Quick Start
Operating Instructions, 12/2008, CQO:QSG002 Revision B