Axis Q3505-VE Guide D'installation page 20

AXIS Q3505–VE Fixed Dome Network Camera
3. Click Perform auto focus to focus the camera automatically.
4. If more adjustments are needed, go to the Advanced tab.
Note
• Movements in front of the camera should be avoided during automatic focusing.
On the Advanced tab, focus can be adjusted manually:
1. Click Open iris to open the iris to its maximum position. This gives the smallest depth of
field and provides the best conditions for focusing.
2. Focus is set in the Focus window. Use the mouse to move and resize the focus window.
3. Click in the Focus position bar to focus on a desired location. The buttons < and > move
the focus position one step in either direction. The buttons << and >> move the focus
position in multiple steps in either direction.
4. When satisfied, click Enable iris to enable the iris.
Set Zoom and Focus - Optical Zoom for Monitoring
To set Focus & Zoom when you have selected Optical zoom for monitoring:
Go to PTZ > Preset Positions and follow the online instructions to set the focus. In order to be able
to retain this focus position after restarting the camera, enter a name for this preset in the Current
position field and select the Use current position as Home option. If you calibrate the optics
while in this Optical zoom for monitoring mode, select this preset from the Available positions
drop-down list in the Preset Positions webpage. Click Go to and Save.
To set limits for focus and zoom:
Go to Video & Audio > Focus & Zoom.
Select a Zoom tele limit value to limit the camera's maximum zoom. The digital zoom level is
indicated with the letter D. To check the zoom tele limit, click Go to.
Set the Focus near limit to prevent the camera from focusing on objects that are too close.
It is possible to set focus and zoom from this page, but the focus will be lost when the camera is
restarted.
Reset to Factory Default Settings
Important
Reset to factory default should be used with caution. A reset to factory default will reset
all settings, including the IP address, to the factory default values.
20