Axis Q3505-VE Guide D'installation page 18

Masquer les pouces Voir aussi pour Q3505-VE:

Les langues disponibles

AXIS Q3505–VE Fixed Dome Network Camera

3. Tighten the 4 tamper proof screws to attach the unit casing to the mounting bracket

using the Resitorx key TR20.

4. Connect the cable to the camera unit.

5. Pull the springs aside in the unit casing and attach camera unit to the unit casing.

Adjust Camera Angle

Lines on optic holder that indicate an increment in the tilt angle by 10°

Small lines on optic mount that indicate a pan increment of 3°

Lines on optic mount that indicate a pan increment of 15°

Lines on lens cover to help ensure camera is level

1. Pan, tilt and rotate the camera to cover the area under surveillance. It is possible to pan

360°, and tilt to an angle of 90°.

2. Pan and rotate the lens to adjust image. Use the 2 lines on the lens cover to ensure

the camera is level. Use the function button to activate levelling aid. See Function

Button on page 13.

Attach Dome Cover

1. Make sure the gasket in the dome cover is clean and sits securely in place.

Q3505-v