Axis Q3505-VE Guide D'installation page 17

AXIS Q3505–VE Fixed Dome Network Camera
Attach Mounting Bracket to Wall
1. Attach the mounting bracket (see Mounting Bracket on page 16) to the wall with
appropriate screws.
2. To route the cables see Route the Cables on page 16.
3. Wind the network cable along the grooves on the mounting bracket keeping the extra
cable length that may be required later.
Connect the Cables and Attach Unit Casing to Mounting Bracket
1. Insert the SD memory card in the camera unit (optional).
2. Push the network cable through the black cable gasket in one of the holes in the unit
casing, using the connector guard provided. Pull the network cable back slightly so that
the cable gasket adjusts itself on the cable.
NO TICE TICE
NO NO TICE
Not pulling the cable back could cause water to seep in and damage the product.
It is recommended to route the cable through the hole farthest from the network connector
in the camera unit (see image below).
17