Counter Reading; Read Total Litres Count; Letture Conteggio Caffè Totali; Read Partial And Total Single Coffee Dose Count - La San Marco TOP 85 Emploi Et Entretien

9. Counter reading

9.1 Read total litres count

Screen 14 a
LITRES TOTAL
Screen 14 b
LITRES PARTIAL
Screen 14 c
SOFTENER CHANGE
WITHIN 500 LITRES
9.2 Letture conteggio caffè totali
Screen 15 a
COFFEE TOTAL
Screen 15 b
COFFEE PARTIAL

9.3 Read partial and total single coffee dose count

Screen 16 a
COFFEE SINGLE DOSES
SELECT DOSE
Screen 16 b
58
Total litre count reading screen.
The first count screen indicates the total quantity of litres loaded
from the machine. These screens will not be displayed if the water
counter was not enabled on screen 43.
Pressing the  /  buttons moves between the display of the three
screens.
If screen 14b is displayed, pressing the Ok button for at least 5 sec-
onds will reset the partial counter.
Press NEXT to go to the next screen.
If no button is selected within 30 seconds, the machine ready screen
will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
Total coffee count reading screen.
The second count screen indicates the total number of coffees made
by the machine.
Pressing the  /  buttons moves between the display of the three
screens, indicating the number of total and partial coffees for the
machine and for each individual unit
If one of the partial coffee screens for the individual units is dis-
played, pressing the Ok button for 5 seconds will reset the partial
counter for each individual unit.
Press NEXT to go to the next screen.
If no button is selected within 30 seconds, the machine ready screen
will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
Read partial and total single coffee dose count screen.
The third count screen displays the number of total and partial doses
brewed for any dose relative to any unit.
The initial screen displays the partial and total number of the single
short dose of the first unit.
The  /  buttons can be used to display the various doses in se-
quence, or it will be possible to directly view the status of any dose
by pressing the relative button.
If one of the 16b screens is displayed, pressing the Ok button for at
least 5 seconds will reset the partial counter.
Press NEXT to go to the next screen.
If no button is selected within 30 seconds, the machine ready screen
will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).