Programming; Menu Access - La San Marco TOP 85 Emploi Et Entretien

MENU: to access programming/reading/change
ESC: to exit the programming/reading/change pages
NEXT: to go from one screen to the next
Ok: to confirm the selection or confirm the change
 / : selection buttons
- / + : buttons for increasing or decreasing the programmable value or activating or deactivating a function
Screen 1
Screen 2
Screen 3 (user)
Screen 3-2 (tecnico)

8. Programming

8.1 Menu access

Screen 4
54
Initial screen.
Visible for about 10 seconds after machine is turned on.
Machine ready screen.
This screen is normally visible when not brewing or when the pro-
gramming menu has not been accessed.
The display shows the temperature of the boiler, the time and based
on what was selected in screen 19, a text with a name or a day and
date.
If the boiler heating element is heating, the image
This screen can always be used for any dosing operation.
Machine brewing screen.
The icon of the selected cup appears on the screen when pressing
a dose button.
During the brewing operation, pressing the button  displays the
unit information, with the progress bar and the brewing duration
in seconds.
During the brewing operation, pressing the butto  displays only
the cups.
At the end of brewing, the last selected view remains displayed.
At the end of brewing, if a brewing time has been detected that is too
long or too short in comparison to what is programmed, screen 42
signalling check grinding/dose will appear. After a few seconds, the
machine ready screen 2 will appear.
Programming/counter/service menu access screen.
This is accessed by pressing the MENU button for at least 5 seconds.
When the screen appears, the counter reader icon (central) will flash
The buttons  ;  are used to select one of the three icons:
user level programming.
counter reading.
technical level programming.
To access user programming
To access counter reading
To access technical programming
the required keys (Ok and +) for at least 5 seconds.
If no ICON is selected within 30 seconds, the machine ready screen
will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
will appear.
press the Ok button.
press the Ok button.
press the combination of