ResMed AirFit P10 Guide De L'utilisateur page 15

Problem/possible cause
One/both of the pillows are squashed
or misshapen or inner wall of one or
both pillows is incorrect.
Pillows are the wrong size.
Pillows may be dirty.
Headgear is too loose.
Component appears damaged or worn
Mask too noisy
System is leaking air.
Technical specifications
Notes:
• The AirFit P10 for AirMini, when connected to the AirMini system,
contains a vent system to prevent CO
• For technical Specifications related to venting, refer to the AirMini
User Guide
Dead Space
Information
Therapy
pressure
The physical dead space is the empty volume of the mask up to the
compatible tubing connector. Using the large cushions it is 40mL.
4 to 20 cm H O
2
Solution
Squeeze individual pillow sides to return each
pillow to original shape.
Talk to your clinician.
Clean pillows according to the instructions.
Adjust the headgear straps or use AirFit P10
headgear clips for additional adjustment.
Replace the part. Contact your local ResMed
dealer.
Refit or reposition your mask. Adjust your
headgear. Check your mask is assembled
correctly.
build-up in the mask.
2
English 9