Bluetooth Functionality; Bluetooth App Set Up; Pairing A Device To The Pump; External Timer / Chlorinator - Davey SilensorPRO SP200BT Instructions D'installation Et D'utilisation

6. BLUETOOTH FUNCTIONALITY

Bluetooth app set up

• Open the "App Store" app that is available on your device.
• Search "Davey Pool Pump"
• Install the app on your device
The app can be installed on to as many devices as desired, however, only one device can control the pump
at any given time. The language and time of the app is the same as your device setting. The measuring units
are automatically defaulted to your device's region units, however, you can choose between Litres, Gallons
or m /hr.
3

Pairing a device to the pump

• Open app on your smart device.
• Turn dial on the pump from "off" to "Bluetooth", you will see the LED flash white for a second.
• On your device, press the connect button.
• When setting up for the first time ONLY, select "YES" to allowing location.
• Please note that the first time the devices are paired, there is a 2-minute time limit to do so before the
procedure will have to be repeated.

External timer / chlorinator

A pop-up will appear asking if you are using an external timer, or
chlorinator to control the SilensorPRO. Please select "yes", "no".
This is a safety function that helps ensure the chlorinator only
runs when the pump is working.
Note: App screenshots are for demonstration purposes only.
Actual screens may vary.
Manual, or scheduled mode
Two modes are available depending on whether you wish to
manually operate the SilensorPRO, or alternatively you can
create a schedule of operation.
Manual mode
• If in schedule mode, press "switch to manual mode"
• The app will now be in manual mode and you can manually
adjust the speed by pressing the (+/ -) buttons.
• In manual mode, the SilensorPRO will run at the set speed,
even if the phone is not in range.
• Anytime the dial is switched to the Bluetooth position, it will
run at the previous set speed after the priming cycle.

Schedule mode

• There are two options (set a daily cycle, or a weekly cycle) by
pressing the desired box.
• This option allows you to either create a standard "daily
schedule" which will consistently operate the set levels every day;
SilensorPro BT
To switch between
manual or schedule
mode you can press
this button.
11
This pop-up
will show
English