ResMed ClimateLine Instructions D'utilisation page 2

If you use the ClimateLine
addition to the ones described above:
1. Remove the cap from the oxygen connector.
2. Connect the oxygen supply tubing to the oxygen connector. Ensure that it is attached firmly.
1
Notes:
• Before adding oxygen, familiarize yourself with the specific warnings relating to the use of
supplemental oxygen. These can be found at the end of your S9 Information Guide.
• If you use the ClimateLine
oxygen connector is attached firmly.
Climate Control
Climate Control is an intelligent system that controls the H5i and the ClimateLine to deliver
constant, comfortable temperature and humidity levels during therapy. Designed to prevent
dryness of the nose and mouth, it automatically maintains the temperature and relative humidity
while you sleep.
Climate Control modes
Climate Control Auto
2
Oxy with supplemental oxygen, perform the following steps in
MAX
Oxy without supplemental oxygen, ensure that the cap of the
MAX
The recommended (default) setting for Climate Control is Auto mode. In
Auto mode, you have the ability to adjust air temperature (61-86°F (16-30°C))
depending on preference. Based on your selected air temperature, Climate
Control automatically adjusts the humidifier output to maintain a constant,
comfortable humidity level of 80% relative humidity while protecting against
rainout. In Auto mode the default air temperature is set to 80°F (27°C).
2