Publicité
Les langues disponibles
Les langues disponibles
Icon
Mode or function
Eco
Open Window Detection
ASC
Stand-by
Fil pilote
Power ON / Stand-by
Press the
ON/STAND-BY key to switch on
the device or to enter the Stand-by mode.
When the device is switched on, the display
shows the set temperature, mode and time.
In Stand-by mode the current time and day
of the week are displayed.
This button activates the same function as the
fan's "ON/STANDBY" button.
Neither enjoys precedence over the other.
Operating modes
Press the
MODE key to select the desired
operating mode, an icon on the display indi-
cates the
selected operating mode (as in the legend
below).
Stand-by
Comfort
Antifrost
Comfort Mode
The temperature Comfort corresponds to
the temperature that the user desires.
This operating mode is intended for the ordi-
nary employment of the thermostat.
• Press the
MODE key until the
fort icon is shown on the display.
• Set the desired temperature through the
and
keys (maximum temperature
32°C)
• Key
and key
mode on for both.
Description
It enables the ECO function
It enables the Open Window Detection
function
It enables the ASC function
The device enters the Stand-by mode
Function not active
Fil-Pilote
Night
Chrono
Com-
with blue light on:
[ 31 - EN ]
• Key
with blue light flashing and key
with blue light on: mode that indicates 1°C
less than the temperature set.
• Key
and key
mode on standby for both.
Night Mode
The Night mode allows setting a tempera-
ture value lower than the Comfort mode
temperature value. It is suggested to select
this operating mode either during the night
or when the room is not occupied for 2
hours or longer.
• Press the
MODE key until the
icon appears on the display
• Set the desired temperature through the
and
keys (maximum temperature
21°C)
• Key
and key
mode on for both.
• Key
with blue light flashing and key
with blue light on: mode that indicates 1°C
less than the temperature set.
• Key
and key
mode on standby for both.
Crono mode
Temperatures of Comfort and Night
modes and the operating time intervals can
be configured.
To activate the Crono function, hold the
MODE button down, until the
appears on the display. The display indicates
Crono.
How to set the time sequence: press the
CRONO key to enter the setting mode.
with blue light flashing:
Night
with blue light on:
with blue light flashing:
Crono icon
Publicité
