DELTACALOR DROP 500 Notice D'utilisation Et D'installation page 26

POWER SUPPLY AND ELECTRICAL CONNECTIONS
• In accordance with the rules in force, the power of the heating • In accordance with the rules in force, the power of the heating
appliance must be protected by an RCD of 30 mA and an over- appliance must be protected by an RCD of 30 mA and an over-
current protection device, suitable to the characteristics of the current protection device, suitable to the characteristics of the
connection line. connection line.
• Before using the appliance the first time, check that the voltage • Before using the appliance the first time, check that the voltage
used corresponds to that specified on the appliance. used corresponds to that specified on the appliance.
• This heating appliance is a class II appliance (double electrical • This heating appliance is a class II appliance (double electrical
insulation). insulation).
• Earth connection is prohibited. • Earth connection is prohibited.
• Connection of the three wires must take place in an electri- • Connection of the two wires must take place in an electrical
junction box compliant with current regulations. cal junction box compliant with current regulations.
• In terms of French regulations, do not fit a plug to the cable • In terms of French regulations, do not fit a plug to the cable
for connecting it to an electrical socket. for connecting it to an electrical socket.
• The pilot wire must be disconnected if not in use.
Single-phase power supply 230 V~ ±10% 50 Hz.
Single-phase power supply 230 V~ ±10% 50 Hz. • Blue/gray wire: Neutral
• Brown wire: Live • Blue/gray wire: Neutral
• Brown wire: Live
• Black wire: Pilot Wire
[ 26 - EN ]