MS Schippers Dumbox Mode D'emploi page 27

*ASSEMBLING SCREEN PANELS ON DOOR ARMS
Screw the included screen panels on the outside on the door axis.
To do this you have to loosen each time the nut on the inside.
(bolt M8x30 + 2x vloot 8 x30 +nut M8)
Cut through the right angle sealing at the bottom at the door on each side of the rails.
4. PLACING OF THE COOL GROUP.
*PLACING OF THE COOL GROUP
Put the cool Group in the provided opening in the box. Screw this tighten with the adjusting screw on the inside.
27