MS Schippers Dumbox Mode D'emploi page 26

*ASSEMBLING OF THE DOOR
Put the door on side and slide the 4 control pieces into the door arms.
Put something underneath the door (+/-25mm) until the top side is the same height as the box. Adjust the door until it locks
well and tighten the control pieces in the door arms.
(bout M8x16 + vloot diam 8)
Fix the spring and piston spring at the bottom door arm.
Only tighten lightly with nut and counter nut.
(spring stainless steel + eye nut M8
on threded rod + nut and counter nut M8)
26