ims PRO TITAN 400 DC Mode D'emploi page 34

Ex : if the JOBS 1 to 50 have been created and the user has entered the number 3 in the sub-menu « C H n » :
- On activation of the sub-mode and when not welding, briefly releasing the torch button allows to show the JOBS one by one from
the 1st to the 50th (going back to the beginning when JOB 100 is reached). Here the user displays the JOBS and chooses the 10.
- Pressing the button for over 0.5s allows to start welding with JOB 10 (first of the sequence) and briefly releasing it loads JOB 11
and then JOB 12 (these 3 JOBS make the sequence).
- When the welding stops, the JOB 10 is loaded and displayed on the interface (this saves the user the task of having to show all
the JOBS again).
>0.5s
The MMI interface has these features:
- The JOB is displayed permanently as well as the settings (TIG LIFT/HF, 4T, Pulse...).
- The cycle is accessible and amendable (the JOB can be changed*),
- The menus are accessible and are amendable. Ex :
• JOB 5, amendable, SAVE IN / JOB 5, the JOB is saved and amended in line with the new settings entered.
• JOB 5, amendable, SAVE IN / JOB inexistent, it will be taken into account in the current q.L if and only if this new JOB X is below the number of
the JOB entered.
- When currently browsing the welding cycle or one of the two menus, the JOB recall function is disabled.
- During welding, when recalling a JOB of the sequence, the screen displays JOB X for 1s.
* A JOB is changed by action on the interface without saving, the welding is authorised without taking into account the modifications on the JOB
recalled.
COMMAND BUTTON(S) CONNECTOR
DB
P
L
Cabling diagram for the SRL18 torch.
Torch double button +
potentiometer
34
IMS TITAN 400 DC
<0.5s <0.5s
1
P
5
torch
2
4
L
DB
torch
2
torch
3
Torch type
Torch double button
>0.5s
4 3
5
2
6 1
NC
Torch with trigger
UK
DB torch
3
4
L torch
2
2
DB + P
5
torch
1
Electric diagram according to torch type.
Wire description Pin
Common/Earth 2 (green)
Button 1 4 (white)
Button 2 3 (brown)
Common/Potentio-
2 (grey)
meter earth
10 V 1 (yellow)
Cursor 5 (pink)