AEG Voxtel D500 Guide De Démarrage Rapide page 8

8
5.3 Base station (see P4)
#
Find
9 Press to page your registered handset(s).
Press and hold to start the registration process.
6 INSTALLATION
6.1 Connecting the base station (see P5)
Plug the power supply and line cord into the base station.
Plug the power adapter into a 110-230 Vac,50/60Hz mains socket and
the line cord into your telephone line socket.
Warning:
Use only the provided adaptor, using other power supplies may cause a
hazard or damage the phone.
Install the base unit in a position where the mains adapter plug will reach
an easily accessible mains socket to unplug in case needed. Never try to
lengthen the mains power cable.
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2 Installing and charging the batteries (see P3)
Place the 2 supplied batteries into the battery compartment with
the polarity markings. Use only the NiMH rechargeable battery type
provided with the telephone.
Position the battery compartment cover over the batteries and slide up
to click into place.
Put the handset on the base and charge for 15 hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.
Meaning