Velp Scientifica OHS 200 ADVANCE Manuel D'instructions page 16

➢
➢
➢
Check Locking
Ring
➢
➢
➢
Reset
➢
Parameters
➢
Update
➢
Software
Counter
➢
Ermes
➢
Motor
➢
Calibration
Alignment sensitivity 0.1°C.
It allows to control the right functioning of Smart Chuck system.
Figure 20
Enter in the menu.
Figure 12. Check Locking Ring
Follow instructions described in the screen.
Once the operation is performed, Check becomes white and a blue bar appears on the left.
It allows to return to default value for all functions.
Click with the speed control knob (C) to reset parameters.
It allows to update the device with a new software version.
Software version, dedicated program to be installed in the PC, and software installation guide have to be
requested by e-mail to service@velp.it.
It allows to see the number of instrument working hours.
It allows to connect the instrument to Ermes Cloud.
It allows to reset the zero torque value.
is visualized.
Figure 11.
performed
16
Check Locking Ring