Velp Ermes Configuration - Velp Scientifica OHS 200 ADVANCE Manuel D'instructions

Reading multiple register: Serial number
Request
Field
Address
Control command
High start address
Low start address
Number of High registers
Number of Low registers
High CRC
Low CRC
Writing single register: STOP rotation
Request
Field
Address
Control command
High start address
Low start address
High register value
Low register value
High CRC
Low CRC
Virtual serial port
Baudrate
Bits
Stop Bit
Patiry
Maximum number of
registers for single request

6. VELP Ermes Configuration

VELP Ermes is a revolutionary cloud platform that transforms and improves your laboratory experience by creating an ecosystem of
instruments, people and data. The VELP Ermes platform is able to reduce distances and accelerate scientific processes in total safety. In
order to access on ERMES, you need to enable your VELP account by selecting "Configure your VELP ERMES account" at
http://www.velp.com/en/login.
To be able to communicate, the instrument needs to be in the operating range of laboratory Wi-Fi (2.4 GHz) and be configured as follows:
➢
Switch on the OHS Advance and select AP in the menu Set-up Wi-Fi (see chapter 7.5).
➢
Using the PC/Tablet/Mobile phone, select the OHS_SERIAL NUMBER available on the Wi-Fi list, in order to connect directly to the
instrument.
➢
Open a browser on the PC/Tablet/Mobile phone and insert the address 192.168.240.1 to reach the configuration page. Insert
"admin" "admin" when requested as user name and password.
➢
Set the parameters required to connect to your Wi-Fi (network name, password, security, mac address, etc.) according to your
internal procedure and save. If necessary, contact your IT administrator.
➢
Select menu Ermes from the Service menu (see chapter 7.6) and proceed with the product registration from the VELP Ermes
platform. For more information see FAQ on VELP website.
NOTE: To access to VELP Ermes is necessary to have a VELP account.
Reply
(Hex) Field
0x64 Address
0x03 Control command
0x00 Number of bytes
0x02 High register value
0x00 Low register value
0x03 High register value
0xFE Low register value
0xAD High register value
Low register value
High CRC
Low CRC
(Hex)
0x64
0x06
0x00
0x6A
0x00
0x01
0xE3
0x61
9600
8
1
None
24
(Hex)
0x64
0x03
0x06
0x31
0x00
0x33
0x32
0x00 0x31 0x32 0x33 0x34 0x35
0x35
0x34
0x0A
0x0A
10
Description
12345
Description
Stop rotation