Publicité
Les langues disponibles
Les langues disponibles
3.
Deflate by squeezing out the remaining air. Or by using the pump on "DEFLATE" mode.
4.
Once deflated, firmly cap each valve.
FOLDING STEPS
Remove all the accessories from the kayak: seats, paddles, kayak fins, etc.
1.
NOTE: For STEAM/MEMBA/RIPPLE, remember to remove the air deck floor before folding.
NOTE: For STEAM, remember to remove the Deck Shield before folding the kayak.
DOWN POSITION
DOWN POSITION
DEFLATE
11" FOOT PUMP
FOR BETTA/ LAXO/ RIPPLE
PINCH VALVE (For BETTA's floor)
Open external cap and pull firmly to extend out. Start to
deflate by using the transparent deflation pipe (comes
with the repair kit bag), or by simply squeezing the
bottom of the valve.
HIGH PRESSURE VALVE
(For BETTA/ MEMBA/ STEAM)
Slowly press down on the valve button to let air out of
the kayak. There will be an initial burst of air, but will
slow down very quickly.
Once the air flow has slowed down, push valve button
in and turn 90 degrees to make sure that valve button
is locked in "DOWN position" for deflation.
14
DEFLATE
16" HAND PUMP
FOR MEMBA/ STEAM
Publicité
