Aqua Marina BETTA BE-312 Manuel De L'utilisateur page 13

KAYAK FIN INSTALLATION
Turn the kayak over. Slide the kayak fin into the fin box and insert the push-in pin.
NOTE: The kayak fins need to be installed if you use the kayak on flat water.
DO NOT USE KAYAK FINS IN WHITE WATER.
WHEN USING THE KAYAK IN FLAT-WATER, SCREW THE DRAIN CAPS DOWN TIGHTLY. OPEN THE
CAPS BEFORE ENTERING WHITEWATER. THE KAYAK WILL BE PARTIALLY FILLED WITH WATER
WHEN THE DRAIN VALVES ARE OPEN.
TIPS:
WHEN OPENING THE DRAINS, TUCK THE CAPS UNDERNEATH THE INFLATABLE FLOOR SO THEY
DO NOT BLOCK THE OPENING AS WATER DRAINS OUT.
DECK SHIELD SET-UP
STEAM
DEFLATION
Clear any water or debris out of the valve
1.
areas.
Open valve caps to start deflation.
2.
BOSTON VALVE (For LAXO/ RIPPLE)
Open the main valve of the Boston valve for
deflation. In this situation, the valve only lets
air out, not in.
13