Cisco Systems Linksys WKPC54G Guide D'installation Rapide page 10

J
Windows will begin copying the
driver files to your computer. If
Windows asks you for the
original Windows CD-ROM,
insert the CD-ROM, and direct
Windows to its proper location
(e.g., D:\).
The installation of the Adapter is
complete.
If you are running Windows XP
A
Locate an available PCMCIA
slot on your notebook PC.
B
Insert the Adapter with the
label side facing up, so the
Adapter fits snugly in the
PCMCIA slot.
C
Windows XP will automatically
detect the Adapter. Insert the
Adapter Setup CD-ROM into
your CD-ROM drive. Select
Install the software
automatically
(Recommended). Then click
Next.
D
When Windows has finished
installing the driver, click Finish.
E
After installing the Adapter, the
Windows XP Wireless Zero
Configuration icon will appear
in your computer's system tray.
10
B
C
Windows XP has a built-in
NOTE:
configuration tool. Use Windows
XP Wireless Zero Configuration
(in the system tray at the bottom
of your screen) to configure the
Adapter.
E