Cisco Systems Linksys WMP54GS Guide D'installation Rapide page 8

1
Install the Adapter
To install the Adapter in a PC running
Windows XP , physically install the
Adapter first. Then install and
configure the Adapter's driver.
A
Power off your desktop PC.
B
Open your PC case, and
locate an available PCI slot on
the motherboard. Check with
your computer manufacturer
for instructions.
C
Slide the Adapter into the PCI
slot. Make sure that all of its
pins are touching the slot's
contacts. You may have to
apply a bit of pressure to slide
the Adapter all the way in.
D
After the Adapter is set firmly in
place, secure its fastening tab
to your PC's chassis with a
mounting screw. Then close
your PC case.
E
Attach the external antenna to
the Adapter's antenna port.
F
Power on your desktop PC.
2
C
E