Cisco Systems Linksys WMP54GS Guide D'installation Rapide page 6

2
Install the Adapter
A
Power off your desktop PC.
B
Open your PC case, and
locate an available PCI slot on
the motherboard. Check with
your computer manufacturer
for instructions.
C
Slide the Adapter into the PCI
slot. Make sure that all of its
pins are touching the slot's
contacts. You may have to
apply a bit of pressure to slide
the Adapter all the way in.
D
After the Adapter is set firmly in
place, secure its fastening tab
to your PC's chassis with a
mounting screw. Then close
your PC case.
E
Attach the external antenna to
the Adapter's antenna port.
F
Power on your desktop PC.
NOTE: A screen stating that a
digital signature was not
found may appear. The
Adapter has been
tested and found to
work properly with
Windows 2000.
Click Yes.
Congratulations! The installation of
the Wireless-G PCI Adapter with
SpeedBooster is complete.
6
C
E
A Division of Cisco Systems, Inc.
For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM
or the Technical Support Insert. You can also
e-mail for further support.
Website
http://www.linksys.com/international
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved.
WMP54GS-QIG_98SE_Me_2000-uk/eu/la-40517NC KL
®