Warn 80540 Instructions De Montage page 7

II. Kit Installation, continued
14. Attach the grab bar with the winch back into
position on the front of the ATV and attach using
the lower mounting locations. (figure 13)
15. Refer to winch manual for wiring information.
16. Read operators manual and the guide to winching
before using the winch.
17. Make sure all wiring is secured with zip ties along
the frame. Make sure that all wiring is clear of
moving parts.
18. Installation is now complete. (figure 14)
WARNING
Tighten all nuts and bolts securely. Failure to
check all nuts and bolts prior to use can result
in product failure which can lead to vehicle
damage and operator injury or death.
III. Maintenance/Care
•
Inspect all metal parts on the winch, winch mount,
and related hardware. Replace all that appears
rusted or deformed prior to use.
•
Inspect all nuts and bolts on the winch, winch mount,
and related hardware prior to each use. Tighten all
nuts and bolts that appear to be loose. Stripped,
fractured, or bent bolts or nuts need to be replaced.
WARNING
Failure to perform regular inspections and
maintenance on the winch, winch mount, and
related hardware may result in vehicle
damage and operator injury or death.
WARN® INDUSTRIES PAGE 7
Figure 13
Figure 14
80539 Rev A0