Publicité
Les langues disponibles
Les langues disponibles
Transmitter features
1.
Keypad.
2.
LCD.
3.
Removable accessory tray.
Transmitter keypad
.
Power key
on and off. Opens the transmitter
menu.
.
Frequency key
frequency. Menu navigation key.
.
Up and down arrows
Adjusts the output signal. Scrolls
through the menu options.
.
Measure key
measurement display between
volts, current and impedance.
Note: displayed measurements are
based on the currently selected
mode or the attached accessory, if
applicable. Opens a submenu.
Transmitter screen icons
8.
Battery icon: Indicates the battery
level.
.
Alphanumeric description of
selected operation mode.
10.
Standby icon: Appears when the
transmitter is in Standby Mode.
11.
Output level: Displays transmitter
output power.
12.
Clamp icon: Indicates when a
clamp or other plug is connected.
13.
DC icon: Appears when the
transmitter is powered from a DC
source.
1.
Induction indicator: Appears when
the transmitter is in Induction
Mode.
: Switches the unit
: Selects
:
: Toggles
1.
A-Frame (Tx3 and Tx10 only):
Indicates when the transmitter is in
Fault-Find Mode.
1.
CD Mode indicator (Tx10 only):
Indicates that the transmitter is in
Current Direction Mode.
1.
Voltage warning indicator:
Indicates that the transmitter is
outputting potentially hazardous
voltage levels.
18.
Volume icon: Displays the
volume level.
1.
Pairing icon (Tx3B and Tx10B
only): Appears when the
transmitter and receiver are
connected via iLOC™.
20.
Bluetooth
®
Tx10B only). Indicates status of
Bluetooth
®
icon means pairing is in progress.
icon (Tx3B and
connection Flashing
Publicité
