Publicité
Les langues disponibles
Les langues disponibles
Finalizing the pairing process
1.
Once both devices are ready to pair press the
and
key on the receiver. You must press these keys within a
30 second window, otherwise the connection may time out.
2.
The transmitter and the receiver will now attempt to pair.
When pairing is in progress, the transmitter and receiver will display a flashing Bluetooth
icon. Pairing can take up to a minute. If the pairing process is successful, the transmitter
will display the
icon and the receiver will display a persistent Bluetooth
duration of the connection.
If pairing fails, ensure that any nearby Bluetooth
or invisible then repeat the process.
Once the receiver and transmitter have successfully paired you can use iLOC™ to
change the transmitter's output frequency and power levels remotely with the receiver.
Using iLOC
Changing transmitter frequency
1.
Switch on the receiver and transmitter by pressing the
respective keypads.
2.
Pair the receiver and the transmitter if you have not already done so.
3.
On the receiver, select the frequency you want by pressing the
frequency is displayed on screen.
.
iLOC commands are sent using the
to the transmitter.
.
The receiver's LCD will display OK on success or FAIL if the iLOC command
was unsuccessful.
Changing transmitter power output
1.
Pair the receiver and the transmitter if you have not already done so.
2.
Transmitter power options are located in the TXOUT menu on the receiver.
Press and hold the
3.
Press the
.
Scroll through the power output options using the
options are:
•
STDBY: Transmitter standby mode, the connection is still active but the
output is disabled.
•
LOW: low power output.
•
MED: medium power output.
•
HIGH: high power output.
key to display the TXOUT menu.
key to enter the TXOUT menu.
key on the transmitter
devices are switched off
®
key, press it to send the new frequency
or
1
®
icon for the
®
key on their
key until the
keys; available
Publicité
