Publicité
Les langues disponibles
Les langues disponibles
.
You should see a device called RD8K; this is the RD8000 receiver.
.
Select the RD8K device and then select the Create New Partnership option.
The pairing process should now begin.
When pairing is in progress, the receiver will display a flashing Bluetooth® icon.
Pairing can take up to a minute. If the pairing process is successful, the receiver
will display a persistent Bluetooth® icon for the duration of the connection.
If pairing fails, ensure that any nearby Bluetooth devices are switched off or
invisible then repeat the process.
Pairing with your PC
On the receiver
The instructions are the same as for pairing to a PDA as described above.
On your PC
1.
Connect a USB Bluetooth
2.
Alternatively if your PC features an integrated Bluetooth
following the documentation that came with your computer.
3.
Open the Control Panel and double click on 'Bluetooth Devices'.
.
Click on Add, Windows will start the 'Add Bluetooth Device Wizard' to guide
you through the process.
.
Check the 'My device is set up and ready to be found' box and click Next to
search for Bluetooth
.
You should see a device called RD8K; this is the RD8000 receiver.
.
Select the RD8K device and click Next.
8.
Tick the 'Use the passkey found in the documentation' box and enter 1234 as
the passkey.
.
Now click Next to begin pairing with the RD8000 receiver.
10.
Completing the Add Bluetooth Device Wizard will be displayed for a successful
pairing.
11.
Click Finish to close the Wizard.
Refer to the SurveyCERT manual
SurveyCERT is an advanced application and as such, it is strongly recommended
that you refer to the SurveyCERT Operation Manual before you conduct your first
SurveyCERT assisted survey. The manual provides more detailed instruction on pairing,
GPS synchronization and using the analysis tools on your PDA or PC. The SurveyCERT
Operation Manual is available from www.radiodetection.com.
adapter to your computer.
®
devices.
®
18
module, switch it on
®
Publicité
