Télécharger Imprimer la page

AN SPX BRAND Radiodetection RD8000 Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

Receiver features
1.
Keypad.
2.
LCD.
3.
Battery compartment.
.
Accessory slot.
.
Headphone jack.
Receiver keypad
.
Power key
on and off. Opens the receiver
menu.
.
Frequency key
frequency. Closes submenu.
8.
Up and down arrows
Adjusts the signal gain. Scrolls
through the menu options.
.
Antenna key
null, single antenna and combined
peak/null modes. Opens a
submenu. Prolonged key press
toggles between depth or current
display on the LCD.
10.
Graph key
SurveyCERT™ measurements.
11.
Transmitter key
commands on iLOC™ enabled
receivers to iLOC™ enabled
transmitters.
Receiver screen icons
12.
Indicates the signal strength and
peak marker.
13.
Signal strength: Numerical
indication of signal strength.
1.
Peak / Proportional arrows:
Indicates the location of the line
relative to the receiver.
1.
Battery icon: Indicates the battery
level.
: Switches the unit
: Selects
: Toggles peak,
: Saves
: Sends iLOC™
1.
Sensitivity and Log number:
Displays the log number
momentarily after a survey log is
saved to memory.
1.
Volume icon: Displays the volume
level.
18.
Current Direction arrows.
1.
Radio Mode: Indicates when
Radio Mode is active.
20.
Power Mode: Indicates when
Power Mode is active.
21.
Accessory indicator: Indicates
when an accessory is connected.
22.
CD Mode icon: Indicates when
Current Direction Mode is active.
23.
A-Frame icon: Indicates when the
A-Frame is connected.
2.
Operating mode indicator.
25.
Bluetooth
®
of Bluetooth
icon means pairing is in progress.
Solid icon indicates an established
connection is active.
2.
Antenna mode icon: Indicates
antenna selection: Peak, Null,
single and combined Peak/Null.
2.
Sonde icon: Indicates that the
signal source is from a sonde.
28.
Line icon: Indicates that the signal
source is from a line.
2.
Compass: Shows the direction of
the located cable relative to the
receiver.
30.
Tx status: Displays transmitter
connection status.
31.
Tx standby: Indicates that the
transmitter is in Standby Mode.
32.
Current / depth indicator.

icon: Indicates status
connection. Flashing
®

Publicité

loading