AN SPX BRAND Radiodetection RD8000 Mode D'emploi page 14

iLOC™
iLOC lets you control the transmitter remotely using your RD8000 receiver. With iLOC you
can adjust the output frequency, power settings and use SideStep. iLOC commands are
sent over a Bluetooth
line of sight.
Pairing
Pairing the receiver to the transmitter is straight-forward; in fact it is easier than pairing
your cell phone to a hands free unit as it does not require a security code.
Before you begin, switch off all nearby Bluetooth
the receiver and transmitter's pairing process.
On the receiver
1. Power up the receiver by pressing the
2. Once the receiver is switched on, press the
the menu.
3. Bluetooth options are located in the BT menu, you can find it by using
the or
. Press the
. Scroll to the PAIR menu using the
the PAIR menu.
. Scroll to the BT-TX option using the
. The receiver is now ready to pair, follow the instructions for the
transmitter to continue.
On the transmitter
1. Power up the transmitter by pressing the
2. Once the transmitter is switched on, press the
to enter the menu.
3. Scroll to the BT menu using the
the key to enter the BT menu.
. Scroll to the PAIR option using the
. The transmitter is now ready to pair.
module that can operate at distances of up to 800 meters in direct
®
keys to scroll through the options.
key to enter the BT menu.
equipment as they may interfere with
®
key.
key again to enter
or arrows and press
or keys.
key.
key
or keys and press
or keys.
1
key to enter