Philips AVENT SCF393 Mode D'emploi page 13

Motor unit part description
1 3
2 4
8
7
Mode indicator lights
The breast pump has two modes. Below you find an explanation of these modes.
Indicator Mode
lights
Stimulation mode
Expression mode
Note: When you change the suction level, the display shows the selected suction level for a few seconds and then
shows the selected mode again.
Suction level indicator lights
Suction level Suction level
1: Bottom light 2: Bottom light
flashes steady on
Note: Every time the level increases, the next light starts flashing or the flashing light becomes solid.
1 USB power inlet
5
2 On/off button with pause/play
6
function
3 Mode selection button
4 'Level down' button
5 'Level up' button
6 Indicator lights for modes and
levels
7 Tubing port for single breast
pump
8 Tubing ports for double breast
pump
Explanation
Mode to stimulate the breast to start up the
milk flow.
Mode for efficient milk removal after milk has
started flowing. After 90 sec. of stimulation,
the device automatically switches to the
expression mode.
Suction level
3: Bottom light
steady on + next
light flashes
No. of suction levels
8 suction levels
16 suction levels
Suction level 4: 2 Suction level 5: 2
lights steady on. lights steady on +
next light flashes.
English
13
Suction level 16:
all lights are on