Philips AVENT SCF393 Mode D'emploi page 9

The following parts do not come into contact with the breast and breast milk; clean them as described below:
Step 1: Disassembling
Disassemble the breast pump, bottle and storage cup completely.
Also remove the white valve from the breast pump.
Step 2: Cleaning
The parts that come in contact with milk can be cleaned manually or in the dishwasher.
Warning: Do not use antibacterial or abrasive cleaning agents to clean the breast pump parts as this
may cause damage.
Caution: Never put the motor unit or the adapter in water or in a dishwasher, as this causes
permanent damage to these parts.
Caution: Be careful when you remove and clean the white valve. If it gets damaged, your breast
pump does not function properly. To remove the white valve, gently pull at the ribbed tab on the side
of the valve. To clean the white valve, rub it gently between your fingers in warm water with some
dishwashing liquid. Do not insert objects into the white valve, as this may cause damage.
When
Clean when needed.
How
Wipe with a clean, damp cloth with water
and mild detergent.
English
9