Electrical Safety - V-ZUG AdorinaSécher V200 AT2HWW Série Mode D'emploi

Important instructions for safety and environment

1.1.1 Electrical safety

A
Electrical safety instructions should be followed while electrical
connection is made during the installation.
A
The appliance must not be supplied through an external switching
device, such as a timer,or connected to a circuit that is regularly
switched on and off by utility.
• Connect the dryer to a grounded outlet protected by a fuse at the value
specified on the type label. Have the grounding installation performed by
a qualified electrician. Our company shall not be liable for any damages
that will arise when the dryer is used without grounding in accordance
with the local regulations.
• The voltage and allowed fuse protection is stated on the type label plate.
• The voltage specified on the type label must be equal to your mains
voltage.
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation, maintenance,
cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by pulling on the
cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to connect the dryer
to power supply in order to decrease the risk of fire and electric shock.
• Power cable plug must be easily accessible after installation.
B
Damaged mains cable should be changed notifying the Authorized
Service.
B
If the dryer is faulty, it must not be operated unless it is repaired
by an authorized service agent! There is the risk of electric shock!
Dryer / User Manual
87 / 112 EN