Federal Signal QuadraFlare 9x7 Instructions D'installation Et D'entretien page 2

Safety Message to Installers
Safety Message to Installers
People's lives depend on your safe installation of our products.
It is important to read, understand, and follow all instructions
shipped with the products. Listed below are some other
important safety instructions and precautions you should follow:
• To properly install this light, you must have a good
understand ing of automotive electrical procedures and
systems, along with proficiency in the installation and use of
safety warning equip ment.
• DO NOT install equipment or route wiring or cord in the
deploy ment path of an airbag.
• If a vehicle seat is temporarily removed, verify with the
vehicle manufacturer if the seat needs to be recalibrated for
proper airbag deployment.
• When drilling into a vehicle structure, ensure that both sides
of the surface are clear of anything that could be damaged.
• Locate light control so the VEHICLE and CONTROL can be
oper ated safely under all driving conditions.
• Do not attempt to activate or deactivate the light while driv­
ing in a hazardous situation.
• This product contains high­intensity LED devices. To prevent
eye damage, DO NOT stare into the light beam at close
range.
• Frequently inspect the light to ensure that it is oper ating
properly and is securely attached to the vehicle.
• After testing is complete, provide a copy of these instructions
to the instructional staff and all operating personnel.
• File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the product.
QuadraFlare
2
QL97LEDSCENE-SB 9 x 7 LED Scene Light
®
Federal Signal www.fedsig.com