Custom Pois (Points Of Interest); Finding Custom Pois; Deleting Custom Pois; Saving Trip Logs - Kenwood DNX9980HD Mode D'emploi

Custom POIs (Points of Interest)

You can manually load custom points of interest
(POI) databases, available from various companies
on the Internet. Some custom POI databases
contain alert information for points such as safety
cameras and school zones. The navigation system
can notify you when you approach one of these
points. You are responsible for ensuring that your
use of safety camera information is lawful in your
area.
NOTICE
Garmin is not responsible for the consequences of
using the safety camera database or other custom
POI databases, or for the accuracy of the safety
camera or other custom POI database.
After downloading your POI database, use the
Garmin POI Loader to install the POIs onto a
USB mass storage device. Use the USB mass
storage device to load the POIs. The POI Loader is
available at www.garmin.com/products
/poiloader. Refer to the POI Loader Help file for
more information; click Help to open the Help
file.
⁄
• The DNX9980HD uses an SD card for mass storage and
loading custom POIs.
• Each time you load custom POIs to the navigation
system, any other custom POIs already saved in the
system will be overwritten.

Finding Custom POIs

To view a list of the custom POIs loaded in your
navigation system, touch Where To? > Extras >
Custom POIs.

Deleting Custom POIs

To delete all custom POIs from your navigation
system, touch Tools > My Data > Delete Custom
POI(s). Touch Yes to confirm.

Saving Trip Logs

Trip logs are recorded while you navigate a route.
⁄
• Trip log data is saved as a .gpx file.
• Saving trip logs is not available on the DNX9980HD.
1 Connect a USB mass storage device to your
Kenwood unit.
2 Touch Tools > My Data > Manage Trip Logs.
3 Select a trip log segment, or View All
Segments.
4 Select Share to export to the USB mass
storage device.
English 29